無人化自動送料系統

無人化自動送料系統特點：
1、有利於提高公司形象，贏得客戶好評與合作。
2、有利保持品質穩定，提高產值，維系質量體系；
3、保持工廠環境整潔，維系環境體系；
4、原料集中管理，避免浪費及污染現象；
5、節省人工成本和原料成本，使用年限長達10年以上；

無人化自動送料系統全自動化設計根據貴公司的規模制定*佳方案；為貴司創造價值宗旨：高產值！高利潤！高效率！
專業設計中央供料系統，注塑周邊整廠規劃。


無人化自動送料系統原料現場：產能及良品率提高且穩定。可適用于多種原料之彈性生產模式。設立原料快速選料站，提高生產效率。原料專人負責管理，減少浪費，降低生產成本。
原料集中除濕干燥，可節省用電量及烘料時間。

無人化自動送料系統生產現場：客戶參觀時有助提升企業整體形象，獲得良好印象，從而增加訂單?，F場作業環境清潔美觀，沒有熱源，提升環境質量，降低人員流動率。
整廠自動化設計，將原料及干燥料筒與現場徹底分開管理，節省空間。


無人化自動送料系統設計流程：原料→儲存→計量→幹燥→輸送→使用
注塑擠出成型中央供料系統采用一臺機一根管，密封式回路設計方式，保證整個系統?行穩定，絕無塑膠回潮、堵料現象發生。它配合中央幹燥機（除濕機）系統使用，可使幹燥空氣對原料進行再次幹燥，防止幹燥後的塑膠回潮，同時在每個輸送循環後對輸送管進行清理，確保管道內沒有殘料。在避免原料回潮的同時也保證加入注塑機中原料一致性，在真空負壓同進作用下，原料中原有的粉塵經過過濾器（集塵器）系統濾出，有利提高產品質量。
無人化自動送料系統料控制器：
采用日本MTSUBISH可編程控制器，人機接口使用日本FUJI7.7寸觸控式彩色液晶顯示屏幕，人性化溝通畫面，內建中英文操作說明書，故障排除方法及電路圖。本系統可控制12個吸料站，可擴展為24站。
根據輔料信號送達PLC的先后順序進行輔料，并顯示等待順序。
具備密碼保護功能，利于現場主管人員管理。
原料選料系統配合選料站可個別設定不同的原料。
越來越多的現代化注塑工廠正在使用拓斯達中央供料系統。
 
 為什么選擇達安泰無人化自動送料系統？
◆實現封閉管路輸送原料，徹底避免對車間的噪音，粉塵，熱氣污染，是*大限度提高產品質量的*佳系統。
◆配合冷卻水循環系統，自動取出傳送系統，冷熱交換系統和次料回收系統，實現全廠無人化作業，企業可以節省用于空調和電燈等設備所消耗的能源。
◆實現全廠加料無人化作業，為企業節省大量人力。
◆費用相對低廉，長遠看為企業節省大量資金。
◆極大的提高產品的品質，降低**率。
◆走管和擺放美觀，可以有效改善生產車間的環境。
◆管路不占據地面空間，為企業節省大量的有效空間。
◆可以根據需要調整不同的原料，為企業省去很多換料的麻煩。
◆極大的提高企業的生產效率，降低企業的生產成本。
無人化自動送料系統案例Unmanned automatic feeding system features:
1, is conducive to improving the company's image, to win customers praise and cooperation.
2, favorable to maintain quality and stability, increase output value, maintain the quality system;
3, to keep the factory environment clean and maintain the environment system;
4, centralized management of raw materials to avoid waste and pollution;
5, save labor costs and raw material costs, the use of life for more than 10 years;

Unmanned automatic feeding system fully automated design according to the size of your company to develop the best program for your company to create value purposes: high yield! High profit! high efficiency!
Professional design central feeding system, injection of the whole plant around the planning.

Unmanned automatic feeding system raw materials on-site: production and yield improved and stable. Can be applied to a variety of raw materials, flexible production model. The establishment of raw materials rapid selection of materials, improve production efficiency. Raw materials are responsible for management, reduce waste, reduce production costs.
Raw material centralized dehumidification drying, can save electricity and drying time.

Unmanned automatic feeding system production site: customers visit to help enhance the overall image of the enterprise, get a good impression, thereby increasing the order. On-site operating environment clean and beautiful, no heat, improve environmental quality, reduce staff turnover rate.
The whole plant automation design, the raw materials and drying barrels and the scene completely separate management, saving space.


Unmanned automatic feeding system design process: raw materials → storage → measurement → drying → transport → use
Injection molding Central feeding system using a machine a tube, sealed circuit design, to ensure the stability of the entire system, no plastic resurgence, blocking material phenomenon occurs. It is used in conjunction with a central dryer (dehumidifier) system to allow dry air to dry the raw material again, prevent moisture from resurfacing, and clean the pipe after each conveyance cycle to ensure that there is no residue in the pipe. In order to avoid the return of raw materials, but also to ensure that the injection molding machine to join the consistency of raw materials in the vacuum negative pressure with the role of the original raw materials through the filter (dust collector) system filter out, favorable to improve product quality.
Unmanned automatic feeding system material controller:
Using Japan MTSUBISH programmable controller, man-machine interface using Japan FUJI7.7-inch touch-color LCD screen, user-friendly communication screen, built-in Chinese and English operating instructions, troubleshooting methods and circuit. The system can control 12 suction stations, can be expanded to 24 stations.
According to the auxiliary signal sent to the PLC order of the auxiliary materials, and display the waiting order.
With password protection, which is conducive to on-site management personnel.
Raw material selection system with the election material station can be individually set different raw materials.
More and more modern injection molding plants are using the Tuo Sida central feeding system.
 
 Why do you choose Diana's automatic feeding system?
◆ to achieve closed pipeline transport of raw materials, to completely avoid the noise of the workshop, dust, hot air pollution, is to maximize the best product quality system.
◆ With the cooling water circulation system, automatically remove the transmission system, hot and cold exchange system and sub-material recovery system to achieve the whole plant unmanned operations, enterprises can save for air conditioning and lighting equipment and other energy consumption.
◆ to achieve the whole plant feeding unmanned operations for enterprises to save a lot of manpower.
◆ the cost is relatively low, long-term view for the enterprise to save a lot of money.
◆ greatly improve the quality of the product, reduce the non-performing rate.
◆ walking and placed beautiful, can effectively improve the production workshop environment.
◆ pipeline does not occupy the ground space for enterprises to save a lot of effective space.
◆ can be adjusted according to the needs of different raw materials for enterprises to save a lot of trouble.
◆ greatly improve the production efficiency of enterprises, reduce production costs.
Unmanned automatic feeding system