產品中心
PRODUCT CENTER
- 聯系人 : 曹鏡森先生
- 聯系電話 : 0769-82226193
- 傳真 : 0769-82226193
- 移動電話 : 15989458768
- 地址 : ** 廣東省東莞市大朗鎮仙村仙一區99號
- Email : caojingshen@126.com
- 郵編 : 523792
- 公司網址 : http://www.blife-tech.com
- MSN : caoshingcer@126.com
- QQ : 454992321
- 聯系人 : 曹鏡森
- 聯系電話 : 0769-82226193
- 傳真 : 0769-82226193
- 公司網址 : http://www.blife-tech.com/
啃齒式慢速機邊回收破碎機
啃齒式慢速機邊回收破碎機詳細介紹
啃齒式慢速機邊回收破碎機的機器特點
▲ 獨特設計的全開放式機身，拆裝簡單，快捷；
▲ 機身表面經過無電解鍍鎳表面處理，不僅增加切削室硬度，且起到防銹作用；
▲ 喂料斗采用雙層不銹鋼制作，更加地降低了噪音；
▲ 切削室的全開放式的獨特設計，切削室沒有死角，清理、維護更方便。
啃齒式慢速機邊回收破碎機機器優點
◆ 低功率，扭矩大；
◆ 轉速慢，噪音低，無過熱現象，使用壽命長；
◆ 破碎腔切削可視化；
◆ 無篩網式切削，顆粒均勻，少粉塵；
◆ 轉子的特殊設計，清理更加便捷。
靜音型粉碎機邊30秒內立即回收,使水口料不因濕化(吸收水蒸氣)污染,而造成塑料產品一一強度;應力,色澤遭受破壞,故可提高成形產品之品質,因轉速低，故使用時噪音低，粉沫少。
啃齒式慢速機邊回收破碎機適合與機邊水口料的粉碎回收，操作方便，品質優異，歐化造型，體積小，慢速靜音，顆粒均勻，粉塵特少，刀具使用壽命長，主要用來放置在塑料成型機旁與機械手搭配將水口料粉碎成顆粒狀，然后由立即回收裝置將其送回塑膠成型幾再次循環使用。
啃齒式慢速機邊回收破碎機適用范圍廣泛用于:塑膠廠、電子廠、塑料容器廠、燈飾廠、鞋廠、電器廠、汽車配件廠、箱包廠、抽粒廠、廢料回收廠、塑料家具廠、塑料玩具廠 、塑料廚具廠等。適合粉碎回收PC、尼龍、ABC等硬質水口料。
不對粉碎料造成污染,粗粉碎刀的刀槽可揪出,方便清潔.投料斗采用防振不銹鋼板制作,降低了噪音,
慢速粉碎機粉碎室的全開方結構無須加油,便于維護,粉碎機的細粉碎刀采用圓弧設計,刀齒不易斷裂,主軸二端的螺旋排出裝置具有防止粉麈進入軸承的作用
啃齒式慢速機邊回收破碎機技術參數表
|
型號 |
口徑mm |
工作能力kg/hr |
電機工率 |
外形尺寸mm |
凈重kg |
軸心轉速 |
|
230A |
230×165 |
8-10 |
1HP(0.75KW) |
600×410×880 |
130 |
27-35r.p.m |
|
230B |
720×350×910 |
120 |
||||
|
250A |
255×230 |
10-15 |
2HP(1.5KW) |
615×580×980 |
192 |
27-35r.p.m |
|
250B |
820×450×980 |
163 |
||||
|
260A |
261×260 |
10-20 |
3HP(2.2KW) |
640×620×1030 |
202 |
27-35r.p.m |
|
260B |
850×450×1030 |
197 |
||||
|
350A |
354×260 |
15-30 |
3HP(2.2KW) |
710×610×1060 |
244 |
27-35r.p.m |
|
350B |
1000×530×1060 |
235 |
||||
|
350C |
354×260 |
15-30 |
5HP(3.7KW) |
710×630×1180 |
300 |
27-35r.p.m |
|
350D |
930×500×1180 |
287 |
||||
|
450A |
450×260 |
15-30 |
5HP(3.7KW) |
710×720×1180 |
330 |
27-35r.p.m |
|
450B |
930×600×1180 |
320 |
||||
|
570 |
570×435 |
20-30 |
5HP(3.7KW) |
1290×675×1661 |
730 |
27-35r.p.m |
Recipe Crusher Recycling Crusher Details
The use of a unique open body structure, when opening the crushing chamber, there is no dead ends, easy to clean, coarse crushing knife using a new type of shear knife, and low speed, thereby reducing the speed of the crusher Powder generation, slow machine edge recovery crusher body surface using electrolytic nickel, not only enhance the hardness of the crushing chamber, but also play a role in rust, and will not fall off,
Silent type chewing teeth slow recovery machine crusher within 30 seconds immediately recovered, so that the water is not due to wetting (absorption of water vapor) pollution, resulting in plastic products one by one strength; stress, color damage, it can improve the shape Product quality, because the speed is low, so the use of low noise, less powder.
It is suitable for the crushing and recycling of the machine side of the machine, and the operation is convenient, the quality is excellent, the Europeanized shape, small size, slow mute, the particles are even and the dust is very small, the tool life is long, To place in the plastic molding machine with the robot with the nozzle material will be crushed into granular, and then by the immediate recovery device will be sent back to the plastic molding a few re-use.
The factory is widely used in: plastic factory, electronics factory, plastic container factory, lighting factory, shoe factory, electrical plant, auto parts factory, luggage factory, pumping tablets plant, waste recycling plant, Plastic furniture factory, plastic toy factory, plastic kitchen utensils factory. Suitable for crushing recovery PC, nylon, ABC and other hard outlet material.
Not to cause pollution of the crushed material, coarse knife knife knife can be uncovered, easy to clean. Feed hopper with anti-vibration stainless steel plate production, reducing noise,
Slow crusher crushing chamber of the fully open side of the structure without the need for fuel, easy to maintain, crusher fine pulverized knife with circular design, knife teeth is not easy to break, the spindle at both ends of the spiral discharge device has to prevent powder into the role of bearing
The technical parameters of the recovery of the crusher
